Part #: BC0622-LE
Intake cams are setup for AVCS. If running non AVCS setup is desired, you must install the four set screws (located in a plastic bag attached to the cam bag) in the front of each intake cam (dowel pin side) using a 2.5mm Allen wrench and LocTite. This will not allow oil to actuate the Active Valve Control System. These cams do not fit the 2008-up STi with dual AVCS. Refer to BC?ÇÖs EJ257B cams.
Specs:
- Adv. Duration: 280/280
- Duration at .050: 234/234
- Lift: .425/.425(in) 10.80/10.80(mm)
NOTE: Brian Crower Subaru EJ257 – 04-07 STi 06-07 WRX Camshafts – Stage 3 – ONLY Left Side Exhaust Cam
?á