The Red is the pennacle of street and strip turbochargers. Small enough that it doesn’t take forever to build up steam but large enough to make north of 525WHP.
Info on turbine housing coating.
The FP EVO Stainless Turbine Housing was designed for race applications where the turbocharger would be operating above 20psi. Attempting to operate below 20PSI can result in boost creep in some applications.
EVO IX JB Red
- Compressor wheel – 76HTZ
- Flow rating – 61LB per minute
- CW Measurements – 54.8MM Inducer / 76MM Exducer
- TW Measurements – 67.3MM Inducer / 58.8MM Exducer
- Compressor Housing – 84MM Flow Advancement Port Cover
- Turbine Housing – FP Stainless EVO 9 Turbine Housing
- CHRA – FP Journal Bearing
- Oil Line – Not Included – Required for proper lubrication.
White paper regarding oil pick up issues and their impact on your turbocharger.
Oil requirements for EVO 9 JB turbochargers
Attention: All Forced Performance turbochargers are built to order to your exact specifications and should not be considered on the shelf ready to ship unless specifically noted on the work order. Build times vary by model of turbo and options of said turbocharger, therefore we cannot guarantee a delivery date or ETA.